Sheet Metal Aluminium
Material Description
Aluminium, with its chemical symbol Al and atomic number 13, is a lightweight, silvery-white, and malleable metal known for its exceptional combination of physical and mechanical properties. It boasts a density of approximately 2.7 g/cm³, making it one of the lightest commercially available metals. This low density, along with its high corrosion resistance due to a naturally forming oxide layer on its surface, makes aluminium a popular choice in various technical applications. The metal exhibits good thermal and electrical conductivity, enabling its use in electrical wiring, heat sinks, and other heat transfer applications. Furthermore, aluminium is highly recyclable, which not only reduces environmental impact but also conserves energy as it takes only a fraction of the energy to recycle aluminium compared to extracting it from bauxite ore, its primary source.
In addition to its lightweight nature, aluminium possesses excellent strength-to-weight ratio, making it a favored material in the aerospace and automotive industries. It is commonly alloyed with other elements like copper, magnesium, and silicon to enhance its mechanical properties. These alloys can be tailored to suit specific engineering requirements, balancing strength, corrosion resistance, and formability. Aluminium’s versatility extends to various forms, including sheets, plates, extrusions, and castings, making it suitable for a wide range of technical applications, from aircraft construction to automotive components, architectural structures, and consumer electronics. Its non-toxic nature and non-magnetic properties further enhance its utility in sectors such as food packaging and medical equipment, underlining aluminium’s significance in modern technical and industrial contexts.
Grades
6061-T6, 7075-T6, 7050, 2024, 5052, 6063, MIC6
Finishing Options
Alodine, Anodizing Types II, III, III + PTFE, ENP, Media Blasting, Nickel Plating, Powder Coating, Tumble Polishing.
| Density | Tensile Yield Strength (MPa) | Fatigue Strength (MPa) | Hardness (Brinell) | Thermal Conductivity (W/m-K) | Coeff. of Thermal Expansion (mm/mdeg) | Electrical Resistivity (micro Ohm-cm) |
|---|---|---|---|---|---|---|
| 2700 | 100-300 | 70-150 | 16 - 120 | ~205 | 23.6 | 2.7 |
Design Recommendation
When designing with aluminum, it’s crucial to prioritize material-specific considerations. Ensure proper alloy selection based on required strength, corrosion resistance, and other relevant properties, as aluminum alloys vary significantly. Implement design features that capitalize on aluminum’s lightweight nature, enabling weight reduction and energy efficiency. Additionally, consider thermal expansion and contraction rates, as they can affect component stability and assembly. Effective heat dissipation strategies should also be integrated, especially in high-temperature applications. Employing rounded corners and smooth transitions can help mitigate stress concentrations, enhancing overall structural integrity. Lastly, surface treatments, such as anodizing or coatings, should be considered to protect against corrosion, ensuring the longevity of aluminum components.
Cost Saving Tip
One effective cost-saving tip in aluminum sheet metal fabrication is to optimize nesting and material utilization. By meticulously planning and arranging the components to be cut from a single sheet of aluminum, manufacturers can significantly reduce material wastage, thus lowering raw material costs. Advanced computer-aided design (CAD) software and nesting algorithms can help identify the most efficient layout for cutting, minimizing scrap and increasing the yield from each sheet. Additionally, this practice not only reduces the expenses associated with purchasing aluminum but also leads to a reduction in labor and energy costs, as fewer sheets need to be processed. Overall, efficient nesting and material utilization is a fundamental strategy for improving the cost-effectiveness of aluminum sheet metal fabrication.
